< Back
Bed Sculptor - 9" Steerable Trencher
BRPT9SH
This walk-behind, steerable trencher comes standard with a 3", 4" or 5" bed edging rotor. It neatly piles excavated dirt in an easy to back-fill pile right next to the trench.
The unit is easy to maneuver and steer allowing for smooth curves for creating landscape beds. Interchangeable rotors provide unmatched versatility for landscaping or trenching operations. This unit is ideal for installing edging, trenching for low voltage wiring, laying landscape bricks and more.
| Engine |
270cc Honda GX |
| Rotor Points |
Tungsten Carbide |
| Max. Trench Width |
9" |
| Rate |
Up to 30 ft/min |
| Drive |
Double Belt and Pulley System |
| Wheels |
Steel w/ pneumatic tires |
| Weight |
175 lbs. |
| • Positive steering mechanism provides smooth curves |
| • Double belt and pulley drive system |
| • Rotors are fully enclosed for safety |
| • Low profile for maximum stability |
| • Standard clay hood reduces soil build up |
| • Minimal turf damage |
| • Clutch level cuts power to rotor for safety |
| • Remove one nut to change rotors |
Accessories
Clay Rotors
(2 point, 3 point, 5 point & 7 point)
Used for burying wires, cable or edging (plastic, steel or other materials). The 3 Point rotor is also used for installing sprinkler systems.
Bedmaster Rotor
Uses different sized rotors to dig 3", 4" or 5" deep and slopes 6" to 8" back into bed. The 3" is designed for bed defining and the 4" and 5" are designed for installing steel or plastic edging, bricks, paving stones or other edging materials.
Rain Drain Rotor
Used to bury 4" drain line in order to divert water from gutter downspouts away from the house. Can also be used for installing block or brick edging.
Re-Defining Rotor
Used for redefining beds. Trenches 3" deep and slopes into the bed 3". Designed as BedMaster alternative for exising beds. Costs less, digs faster and requires less clean up.
Rock Rotor
Used for areas of heavy, scattered rock conditions. Requires 4 replaceable tungsten carbide rock points for operation (sold separately). 1 1/2" or 3" Rock Rotors available.
StumpMaster Rotor
Used to remove small stumps up to 3-1/2" below the ground surface and no higher than 6" above the ground. May also be used for removing large surface roots.
Root Pruner Rotor
Used for pruning roots close to sidewalks, driveways, cart paths or other paved areas, preventing concrete damage. Also used for installing electronic dog fencing, and burying irrigation control wires or lines for low voltage lighting.
Curbing Rotor
Used to repare the bed for concrete curbing machine. It digs a 2" deep by 9" wide trench.
